Equipment Training
Get Started
New Member Orientation
Mandatory
This course is required for access to the Makerspace.
Student Dashboard
Use this page to view your courses and earned certificates
Online Course Support
If you experience any issues with the online training course – please do not hesitate to contact support.
WoodShop
Woodshop: Part A
Required for access to these tools:
This course is required for access to the:
- Jointer
- Planer
- Table Saw
- ~2.75 Hours to Complete
Woodshop: Part B
Required for access to these tools:
This course is required for access to the:
- Track Saw
- Electric Hand Planer
- Festool Vacuum & Sander
- Miter Saw
- Drum Sander
- Edge Sander
- ~2.75 Hours to Complete
Woodshop: Part C
Required for access to these tools:
This course is required for access to the:
- Band Saw
- Nova Drill Press
- Router Table
- 2 Hours to Complete
Woodshop: Part D
Required for access to these tools:
This course is required for access to the:
- Mortising Machine
- 0.5 Hours to Complete
Computer-Controlled
Laser Cutter Training
Required for access to the lasers
This course is required for access to the:
- Medium Laser – CamFive CFL-CMA2416
- Large Laser Cutter – CamFive CFL-CMA5136
- 3 Hours to Complete
CNC Router
Required for access to CNC
This course is required for access to the:
- Wood 4′ x 4′ CNC router
- 1.5 Hours to Complete
Metal Shop
Future Course
Future Course
3D Printing
3D Printers Introduction
How to use our 3D printers
Required before using any 3D printer.
START HERE
This will be the new first course, users will then have to take the filament or resin introduction courses.
- 1 Hours to Complete
Filament Printing
Required before using any filament-based 3D printer.
Please only complete Filament or Resin to begin with, not both.
Currently this is a guided introduction, then we will direct you to the old content for filament to use until the guided course is available. You will be able to use these printers after completing this and the in-person training:
- Prusa Mk2.5S (Prusa 1,2,3)
- Prusa Mk3S (Prusa 4)
Once you’ve finished we will be notified, but you can contact us on Slack in the #3d-printers channel.
- 1 Hours to Complete
Resin Printing
Required before using any of our resin 3D printers.
Please only complete Filament or Resin to begin with, not both.
Currently a minimal presentation, mainly covering safety. Do this, then request in-person training.
- 15min to complete
Prusa Mini Operation
Require before using the Prusa Mini
Add-on training for Filament Printing
Required to use the Prusa Mini – no in-person training required after completing this course.
No in-person training required after completing this.
- 15min to complete